top of page

Load data for .510 DTC + .510 | 700gr | Barnes RNSP

Recommended Powder(s): none

.510 DTC + .510 | 700gr | Barnes RNSP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.510 | 700gr | Barnes RNSP
Manufacturer SKU:
51030
Bullet Weight:
700gr | 45.4g
Bullet Diameter:
0.510" | 12.95mm
Bullet Length:
1.398" | 35.5mm
Caliber:
.510 DTC load data
Case Length (l3):
3.785" | 96.1mm
Cartridge Length (C.O.L.):
5.061" | 128.6mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
300.0 Grains of Water | 19.48 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
52214 psi | 3600 bar
LID:
LID_B860_C871
Last updated:
2025-01-01

Load data for 36 loads in caliber .510 DTC with .510 | 700gr | Barnes RNSP bullet and 18 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2217
<<locked>>
84%
46717
89%
**21
100%
ADI AR 2218
<<locked>>
89%
46847
90%
**33
98%
ADI AR 2225
<<locked>>
86%
46978
90%
**54
100%
Accurate 8700
<<locked>>
95%
46992
90%
**48
98%
Alliant Reloder-33
<<locked>>
85%
46847
90%
**74
98%
Alliant Reloder-50
<<locked>>
89%
46949
90%
**80
97%
Hodgdon H1000
<<locked>>
84%
46717
89%
**21
100%
Hodgdon Retumbo
<<locked>>
86%
46978
90%
**54
100%
[Hodgdon US 869]*
<<locked>>
92%
46920
90%
**28
93%
IMR 8133 Enduron
<<locked>>
89%
46804
90%
**48
100%
[Lovex D100]*
<<locked>>
86%
46891
90%
**85
94%
Norma 217
<<locked>>
88%
46847
90%
**54
100%
[Ramshot LRT]*
<<locked>>
89%
46891
90%
**77
93%
SNPE Vectan SP 13
<<locked>>
93%
46775
90%
**21
97%
Vihtavuori 20N29
<<locked>>
94%
46818
90%
**41
95%
[Vihtavuori 24N41]*
<<locked>>
88%
46905
90%
**38
93%
Vihtavuori N170
<<locked>>
87%
46992
90%
**88
97%
Vihtavuori N570
<<locked>>
84%
46978
90%
**90
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2217
<<locked>>
81%
41568
80%
**36
99%
[ADI AR 2218]*
<<locked>>
81%
35621
68%
**83
94%
ADI AR 2225
<<locked>>
81%
38740
74%
**16
100%
[Accurate 8700]*
<<locked>>
82%
29965
57%
**87
90%
Alliant Reloder-33
<<locked>>
81%
39798
76%
**43
96%
[Alliant Reloder-50]*
<<locked>>
81%
34780
67%
**21
93%
Hodgdon H1000
<<locked>>
81%
41568
80%
**36
99%
Hodgdon Retumbo
<<locked>>
81%
38740
74%
**16
100%
[Hodgdon US 869]*
<<locked>>
87%
39726
76%
**93
90%
IMR 8133 Enduron
<<locked>>
81%
36158
69%
**44
98%
[Lovex D100]*
<<locked>>
81%
40074
77%
**60
91%
Norma 217
<<locked>>
81%
37043
71%
**67
100%
[Ramshot LRT]*
<<locked>>
84%
39624
76%
**29
90%
[SNPE Vectan SP 13]*
<<locked>>
81%
30922
59%
**93
90%
[Vihtavuori 20N29]*
<<locked>>
86%
34534
66%
**92
90%
[Vihtavuori 24N41]*
<<locked>>
84%
39711
76%
**97
90%
[Vihtavuori N170]*
<<locked>>
81%
39349
75%
**41
94%
Vihtavuori N570
<<locked>>
81%
42844
82%
**08
96%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page